# Built-in CODE server triggers mod-evasive

**URL:** <https://forum.collaboraonline.com/t/built-in-code-server-triggers-mod-evasive/2796>\
**Category:** Uncategorized\
**Created:** [July 19, 2024, 6:23pm UTC](https://forum.collaboraonline.com/t/built-in-code-server-triggers-mod-evasive/2796 "2024-07-19T18:23:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jimbolaya](https://avatars.discourse-cdn.com/v4/letter/j/a4c791/32.png) [@jimbolaya](https://forum.collaboraonline.com/u/jimbolaya)\
**Post date:** [July 19, 2024, 6:23pm UTC](https://forum.collaboraonline.com/t/built-in-code-server-triggers-mod-evasive/2796/1 "2024-07-19T18:23:36Z")

</div>

I installed the built-in CODE server in Nextcloud to try to simplify my systems management. I was able to get one document up, but any further attempts to open any document resulted in “Server has disconnected.” and a “You has left.” messages.

After some troubleshooting, I tracked it down to using the mod-evasive module in my Apache installation. When I turned off mod-evasive, it worked fine.

Unfortunately, without mod-evasive, I’m seeing many more attempts on my web-server. It doesn’t appear that mod-evasive can be configured by page served, only by connection attempts per IP.

Has anyone else experienced this? Have you gotten around it some way?