# No Installation candidate

**URL:** <https://forum.collaboraonline.com/t/no-installation-candidate/1048>\
**Category:** Installation & Configuration\
**Created:** [April 16, 2022, 1:46pm UTC](https://forum.collaboraonline.com/t/no-installation-candidate/1048 "2022-04-16T13:46:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jet438](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@jet438](https://forum.collaboraonline.com/u/jet438)\
**Post date:** [April 16, 2022, 1:46pm UTC](https://forum.collaboraonline.com/t/no-installation-candidate/1048/1 "2022-04-16T13:46:34Z")

</div>

Hi all:  
I’m trying to install on a Raspbian 10 machine. I followed the instructions for the native Linux install and received the following after a sudo apt install coolwsd code-brand command:  
_Package coolwsd is not available, but is referred to by another package._  
_This may mean that the package is missing, has been obsoleted, or_  
_is only available from another source_

_E: Package ‘coolwsd’ has no installation candidate_

I tried it for both the Debian 10 and 11 repositories

Thanks for your help in advance.

---

<div class="post-metadata">

**Author:** ![bearon](https://avatars.discourse-cdn.com/v4/letter/b/9de053/32.png) [@bearon](https://forum.collaboraonline.com/u/bearon)\
**Post date:** [April 18, 2022, 4:45am UTC](https://forum.collaboraonline.com/t/no-installation-candidate/1048/2 "2022-04-18T04:45:26Z")

</div>

Right, those repositories only contain x64 packages.  
For the time being the only ARM packages are for Ubuntu 18.04:

> **[Setting up and configuring native CODE packages on Linux](https://www.collaboraoffice.com/code/linux-packages/)**
>
> Collabora provide native Linux packages for selected Linux distributions: Debian 9, Debian 10, Ubuntu 16.04, Ubuntu 18.04, Ubuntu 20.04, CentOS 7 (at least 7.2), CentOS 8, SLE 15.x and openSUSE Leap 15.x. 1. Import the signing key CODE packages are...

Alternatively, if you have set up Nextcloud on the Pi, you could try the Collabora Online - Built-in CODE Server (ARM64) app.  
And FYI, you need a 64-bit OS.

---

<div class="post-metadata">

**Author:** ![jet438](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@jet438](https://forum.collaboraonline.com/u/jet438)\
**Post date:** [April 18, 2022, 10:57am UTC](https://forum.collaboraonline.com/t/no-installation-candidate/1048/3 "2022-04-18T10:57:39Z")

</div>

Thanks for the quick reply.  
The 18.04 release isn’t going to work for me. It’s just too far back in the life cycle. The built-in sounds like it may be a possibility, although they report it to be slower and when they report it to be slower it generally means it’s s l o w e r. Ha. I also seem to recall that I tried it awhile back and it crashed my entire nextcloud install (and yes I’m running 64 bit).  
I’ll have to think about this one for a while, but thanks.

---

<div class="post-metadata">

**Author:** ![jet438](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@jet438](https://forum.collaboraonline.com/u/jet438)\
**Post date:** [April 18, 2022, 12:53pm UTC](https://forum.collaboraonline.com/t/no-installation-candidate/1048/4 "2022-04-18T12:53:51Z")

</div>

If I go for the built-in code server does it require open access to the internet? My topology right now is that I use a reverse proxy for my Nextcloud instance.  
Thanks.